Products

Select the local Power Line Frequency

Complete Seismic Monitor & Alarm System,
Light Gray Case

Made in U.S.A.

$1535.00

Select the local Power Line Frequency

Seismic Monitor & Alarm System without the 100' Outside Seismic Cable, Black Case

This Seismic Monitor & Alarm System bundle includes the Infrasignal Radio, Display Stand, AC to DC wall adapter, 12′ inside Seismic Cable, Thru-The-Wall cable adapter, seismic sensor hardware mounting kit, 3D Seismic Sensor, 3/4″ spade drill bit, 12″ pilot hole drill bit, 15″ dowel to assist in the installation of the Thru-The-Wall cable adapter and an Operators Manual & Installation Guide. To order a longer outside Seismic Cable to reach between the Thru-The-Wall cable adapter and the Seismic Detector, contact us with your requirements.

Made in U.S.A.

$1429.00

Select the local Power Line Frequency

Seismic Monitor & Alarm System without the 100' Outside Seismic Cable, Light Gray Case

Made in U.S.A.

$1429.00

Select the local Power Line Frequency

Use Your Own Outside Sensor,
Black Case

This bundle includes the Infrasignal Radio, Display Stand, AC to DC wall adapter, Operators Manual & Installation Guide, 12′ inside sensor cable, Thru-The-Wall cable adapter and the 8 Pin Cable Adapter. This is all you need to connect to your own outside cable and sensor. Your sensor could be an intruder detection device, a very large loop antenna, an infrasonic pressure wave sensor, infrasound microphone or vibration sensor.

Made in U.S.A.

$1195.00

Select the local Power Line Frequency

Use Your Own Outside Sensor,
Light Gray Case

Made in U.S.A.

$1195.00

Select the local Power Line Frequency

Use Your Own Inside Sensor,
Black Case

This bundle includes the Infrasignal Radio, Display Stand, AC to DC wall adapter, Operators Manual & Installation Guide, and the 8 Pin Cable Adapter. This is all you need to connect to your own inside sensor. Your sensor could be an intruder detection device, vibration sensor or you could route your own cable outside and connect to a loop antenna, etc.

Made in U.S.A.

$1096.00

Select the local Power Line Frequency

Use Your Own Inside Sensor,
Light Gray Case

Made in U.S.A

$1096.00

Select the local Power Line Frequency

EMP Monitor & Alarm System,
Black Case

The EMP Monitor & Alarm System includes the InfraSignal Radio, Display Stand, AC to DC wall adapter, EMP Sensor, EMP Sensor Cable, EMP Test Magnet and an Operators Manual & Installation Guide.

Made in U.S.A.

$1166.00

Select the local Power Line Frequency

EMP Monitor & Alarm System,
Light Gray Case

The EMP Monitor & Alarm System includes the InfraSignal Radio, Display Stand, AC to DC wall adapter, EMP Sensor, EMP Sensor Cable, EMP Test Magnet and an Operators Manual & Installation Guide.

Made in U.S.A.

$1166.00

Select the local Power Line Frequency

InfraSignal Radio,
Black Case

Included with the InfraSignal Radio is an Operators Manual & Installation Guide and a AC to DC wall adapter.

Made in U.S.A.

$1014.00

Select the local Power Line Frequency

InfraSignal Radio,
Light Gray Case

Included with the InfraSignal Radio is an Operators Manual & Installation Guide and a AC to DC wall adapter.

Made in U.S.A.

$1014.00

Select the local Power Line Frequency

EMP Sensor

Included with the EMP Sensor is a special EMP cable and test magnet.

Made in U.S.A

$110.00

Select the Cable Length Needed

Custom length sensor cables are available in 50 foot increments up to 1000 feet.

Lengths start at 150 feet and increase in 50 feet increments.

Price starts at $125.00 and increase in $19.00 increments. No custom charge.

Custom cables are sold and shipped separately. Contact Us with length requirements.

3D Seismic (Vibration) Sensor

Included with the Seismic Sensor is a hardware mounting kit. The kit includes stainless steel hardware to mount the sensor to almost any surface.

Made in U.S.A.

$72.00

Display Stand

The Display Stand comes complete with four preinstalled Velcro (hook & loop) pads and four rubber feet.

Made in U.S.A.

$41.00

Thru-The-Wall cable adapter kit.

The Thru-The-Wall cable adapter kit includes inside and outside face plates, mounting hardware, a 12″ pilot hole drill bit, 3/4″ spade drill bit and a 15″ dowel to assist in the installation.

Made in U.S.A.

$48.00

100' Seismic Cable

This is the 100′ standard length seismic cable. This cable connects between the outside end of the Thru-The-Wall cable adapter or Infrasignal Radio and the 3D Seismic Sensor or 3 Pin Cable Adapter.

Made in U.S.A.

$104.00

12' Seismic Cable

This is the standard length 12′ inside seismic cable. The cable normally connects between the Infrasignal Radio and the inside end of the Thru-The-Wall cable adapter or the 3D Seismic Sensor when installed inside.

Made in U.S.A.

$49.00

For those that like to experiment

8 Pin Cable Adapter

This cable adapter is used to connect between the InfraSignal Radio or the outside end of the Thru-The-Wall cable adapter and the customer’s supplied cable such as RG-58, telephone or zip wire, etc. Detail connection information is provided in the Operators Manual & Installation Guide.

CAUTION: Experiment at your own risk. InfraSignal Radio LLC will not be held responsible for any damages.

Made in U.S.A.

$41.00

For those that like to experiment

3 Pin Cable Adapter

This cable adapter is used to connect between the 12′ inside sensor cable or any length outside sensor cable and the customer’s supplied sensor. The sensor could be a regular microphone, infrasound microphone, hydrophone or a very large loop antenna, etc. Detail connection information is provided in the Operators Manual & Installation Guide.

CAUTION: Experiment at your own risk. InfraSignal Radio LLC will not be held responsible for any damages.

Made in U.S.A.

$28.00